Abstract
The dynamic failures of flat and single-curved woven basalt/epoxy laminates subject to blast loading were investigated experimentally. Number of fiber layers ((0/90)9, (0/90)18 and (0/90)28) and radii of curvature (infinity, R= 500mm and R= 250mm) were considered for the laminates in the experiment. A four-cable ballistic pendulum system was utilized to measure the impulse from the blast loading applied to the specimens. The tests were primarily conducted to characterize the deformation and failure modes of the laminates subject to blast loading, followed by a series of postmortem macroscopic and microscopic examinations to analyze the failure mechanism of laminates. The results showed that the blast-resistance of basalt/epoxy laminates was greatly enhanced through increasing the thickness. By decreasing the radius of curvature, the deformation mechanism of laminates under blast impact changed from flexural modes to indentation modes. Optical and scanning-electron (SEM) micrographs showed that the macroscopic delamination was mainly caused by matrix failure and debonding between fiber and matrix. Meanwhile, extensive fiber breakage led to the further macroscopic fracture of the laminates.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
