Year-end Sale % OFF 
Abstract
Mass timber construction has been gaining momentum in multi-story residential and commercial construction sectors in North America. As taller mass timber buildings are being planned and constructed, in-situ dynamic tests of this type of construction can be performed to further validate their design and use. As part of this larger effort, an in-situ dynamic characterization testing campaign based on ambient vibration measurements was conducted on a recently constructed four-story mass timber building located in Portland, Oregon. The building features cross-laminated timber (CLT) floors, a glued laminated timber (GLT) framing gravity system, and light-frame shear walls and steel HSS hold-downs that compose the lateral resisting system of the building. Ambient vibration acceleration testing data were collected using 18 accelerometers that were wired to a portable data acquisition system in two experimental setups. Approximately two hours of bi-directional horizontal acceleration data were recorded. In this paper, two operational modal analysis methods are used for estimating the modal parameters (frequency, damping, and mode shapes) based on the data collected. In addition, a multi-stage linear Finite Element (FE) model updating procedure is presented for this building type and the FE estimates of frequencies and mode shapes are compared to estimates from the collected data. The calibrated FE model provides confidence to the operational modal results, and presents a comprehensive modal characterization of the building. At ambient levels of excitation, the developed FE model suggests that stiffness of the non-structural elements, such as the exterior wall cladding and glazing affects the modal response of the building considerably. Lessons learnt on this unique and first of a kind four-story structure constructed in the United States and implications for taller mass timber buildings are summarized and provide valuable insight for the design and assessment for this building type under future dynamic excitation events.
Highlights
The last decade has been marked with a rise in interest and use of mass timber construction in North America (Pei et al, 2016)
This study evaluated the variability in damping ratios of three ambient vibrations tested large civil engineering structures using the Subspace Identification (SSI) method
The main objective of this paper is to provide a benchmark dataset on the dynamic characterization of an as-built hybrid mass timber construction of the first building constructed in the United States using US manufactured cross-laminated timber (CLT)
Summary
The last decade has been marked with a rise in interest and use of mass timber construction in North America (Pei et al, 2016). These products are typically used in structural systems in conjunction with other wooden and non-wooden structural members. With the use of mass timber structural products along with light-frame shear wall systems, a new opportunity in expanding the use of light-frame construction to a larger variety of occupancy types and to higher building heights has presented itself. This new opportunity warrants the need to improve the understanding of the performance of lateral dynamic behavior of this combined mass timber/light-frame structural system, especially of actual constructed facilities
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
