Abstract
As a high-temperature resistant damping material, reducing vibration by coating with M-shape metal rubber (MMR) in a pipeline system is a promising solution due to its energy dissipation induced by micro dry friction between metallic wires. The main challenge for dynamic calculation and performance evaluation of elastic-porous metal rubber (MR) is derived from the intricate spatial network structure. In this work, the dynamic properties including acceleration admittance and insertion loss of the MMR-coated pipeline system were conducted by numerical simulation and experimental analysis. The constitutive models used to characterize hysteresis phenomena, including Yeoh and Bergström–Boyce models, were identified with different density parameters and adopted for steady-state dynamic numerical analysis. The sine sweep frequency test was conducted to verify the accuracy of the developed numerical model. The results indicate that the maximum error of stress–strain curve between numerical prediction and experimental measurement is 10.7%. In the frequency range of 0–1 500[Formula: see text]Hz, the insertion loss of the MMR-coated pipeline system is positively correlated with the density of MMR, as opposed to the coating distance of pipeline clamps and the influence of excitation force is minimal. Furthermore, the error of dynamic response of the pipeline system in low frequency between the experiment and simulation is 4.7%, indicating that the accuracy of the hysteresis model in predicting the dynamic characteristic of MR materials is effective.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: International Journal of Structural Stability and Dynamics
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.