Dynamic behaviors of seismic-designed RC beams under asymmetrical low-velocity impact loads

Abstract

Seismic-designed reinforced concrete (RC) structures could be subjected to asymmetrical low-velocity impact loads, e.g., vehicle/barge collisions and rockfall impacts, while existing studies mainly focus on the dynamic responses of symmetrical impacted scenarios. This study experimentally and numerically examined the influence of stirrup ratio and impact location on failure modes and impact behaviors of RC beams. Firstly, symmetrical and asymmetrical drop-weight tests were conducted on six RC beams, and digital image correlation technique was applied to capture the damage evolution process and dynamic responses. Then, the above test was reproduced to validate the applicability of the finite element analyses approach, and numerical simulations were further performed to explore the transformation mechanism of the failure mode of asymmetrical impacted beams. The results showed that, (i) the shear-bending capacity ratio of the beam decreased with the stirrup ratio increasing or the impact location moving towards the mid-span, causing its failure mode to transform from shear to flexural under asymmetrical impact loads; (ii) the shear bearing capacity mainly controlled the occurrence of concrete cracking of asymmetrical impacted beams, and moment bending capacity influenced the post-cracked performance; (iii) increasing the stirrup ratio improved the joint action between longitudinal bars and stirrups and enhance the confinement effect on concrete, reducing the damage degree and deformation of asymmetrical impacted beam; (iv) under the effect of shear wave propagation, asymmetrical impacted beams completed the global impact process faster than symmetrical impacted ones. Finally, a two-degree-of freedom model was established to quickly calculate the displacement-time history at the impact location of asymmetrical impacted beams. The current work could provide a helpful reference for the impact-resistant design of RC structures against asymmetrical impact loads.