Abstract
The catcher bearing is a crucial part of the magnetic bearing system. It can support the rotor when the magnetic bearing is shut down or malfunctioning and limit the rotor’s position when large vibration occurs. The sleeve bearing has the advantages of a relatively large contact surface area, simple structure and an easily replaced surface. There are already many applications of the sleeve type catcher bearings in the industrial machinery supported by the magnetic bearings. Few papers though provide thorough investigations into the dynamic and thermal responses of the sleeve bearing in the role of a catcher bearing. This paper develops a coupled elastic deformation — heat transfer finite element (FEM) model of the sleeve bearing acting as a catcher bearing. The FEM model investigates the dynamic and thermal behavior when a flexible rotor drops onto the sleeve catcher bearing. The thermal load caused by the thermal expansion is also considered. The flexible rotor is composed of Timoshenko beam elements. A coulomb friction model is used to model the friction force between the rotor and the sleeve bearing surface. The contact force and 2-D temperature distribution of the sleeve bearing are obtained by numerical integration. To validate the FEM code developed by the author, firstly, both the mechanical and thermal static analysis results of the sleeve bearing model are compared with the results calculated by the commercial software, “SolidWorks Simulation”. Secondly, the transient analysis numerical results are compared with the rotor drop test results in reference 13. Additionally, this paper explores the influences of different surface lubrication conditions, different materials, such as stainless steel, bronze, and aluminum, on rotor-sleeve bearing’s dynamic and thermal behavior. This paper lays the foundation of the fatigue life calculation of the sleeve bearing and provides the guideline for the sleeve type catcher bearing design.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have