Abstract
The buildings energy sector is expected to account for 40% of total world energy consumption and 40% participation on total carbon dioxide emissions, according to the International Energy Agency reports. The present study proposes a novel integrated system to meet all loads of the house's energy requirements. The system employs a heat storage tank rather than pricey batteries, which helps to keep the total cost of the system as low as feasible. Also, the system is developed for an on-grid operation, being capable to sell surplus energy to the grid helping to reduce the payback time. Dynamic modeling is conducted to analyze the system performance to provide heating, cooling and power demands of a case study building, for which two scenarios of with and without Phase Change Material (PCM) incorporation is considered. The influence of critical design factors is investigated, after which a tri-objective optimization is carried out. It was found that, the integration of PCM energy storage would reduce the annual heating and cooling demands of the building by 25.6%. As a result, the exergy efficiency of the proposed system increases by 13 % and the product cost is reduced by 8.57%. Based on the obtained yearly average results, the proposed building energy system yields exergy efficiency, unit product cost, and CO2 emission of 64.3 %, 0.26 $/kWh, and 0.21 kg/kWh, respectively.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
