Abstract
A study has been conducted into the dyeing of poly(lactic acid) fibres in supercritical carbon dioxide. The fibres were completely dyed using disperse dyes at 50 °C as shown by fibre cross‐sections, although high colour depths in dark shades still prove challenging. Dye uptake increased significantly at temperatures ≥80 °C. At 95 °C in supercritical carbon dioxide, shrinkage and hardening of raw poly(lactic acid) were observed which could partly be overcome by the supercritical carbon dioxide extraction step. Afterclearing with cold supercritical carbon dioxide (to remove unfixed dye after dyeing) decreased the colour depth and led to non‐uniform dyeing results on poly(lactic acid). Wash and rub fastness was good to very good also when poly(lactic acid) was not aftercleared in supercritical carbon dioxide. Fibre damage and elongation at break in supercritical carbon dioxide were similar to water.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.