Abstract
Novel elastomer/modified carbon nanotube nanocomposites were prepared by melt mixing ethylene vinyl acetate (EVA) matrix with dye-grafted multiwalled carbon nanotubes (MWCNTs, CNTs in short). The latter were prepared by spontaneous reactions of diazotized Azure A (AA-N2+), Neutral Red (NR-N2+) and Congo Red (CR-N2+) dyes with CNTs in water at RT. The dispersion of the dye-modified CNTs was facilitated with cholesteryl 1-pyrenecarboxylate (PyChol) surfactant. The EVA/modified CNT nanocomposites were employed as optothermal actuators. The photo-actuation measurements were performed on the un-stretched as well as the stretched strips of pristine EVA and EVA/CNT-dye nanocomposites using a dynamic mechanical analyzer (DMA) equipped with a red light emitting diode (red LED) at a wavelength of 627 nm illuminated either 10 s or 30 s. The concentration of modified dyes, the use of PyChol surfactant and the applied pre-strain were the parameters investigated in this work.To sum up, the nanocomposites prepared so far could be regarded as promising optothermal actuators used for touch displays visually impaired people.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
