Abstract

The oil painting “La Medusa” executed by Caravaggio at the end of the XVI century on a wooden shield, was investigated by integrated physical–chemical and analytical methodologies in order to obtain scientific data capable of elucidating the state of conservation and the painting technique. Optical (OM) and electronic (SEM-EDS) microscopy, micro-FT-IR spectroscopy, gas chromatography–mass spectrometry (GC–MS) and pyrolysis GC–MS were applied on two microfragments and some organic samples obtained by solvent extraction using the swab cleaning technique. The obtained results indicated that Caravaggio probably reused an old shield as a previous gypsum preparation layer has been detected under the original painting layers. He used white lead, natural earths, verdigris and lead–tin yellow type I mixed with drying oils to paint. The considerable amount of amorphous particles of copper chlorides found in the green pigment verdigris suggests that it could have been produced according to the ancient recipe of verde salsum described by Theophilus. Mordant gilding has been identified on the upper part of the shield that can be related to an abandoned experiment to give the painting a mirror-like reflecting effect. Three different varnishes layers have been detected above the painted surface. The original and restoration varnishes have been identified and they contain a mixture of drying oil, mastic and turpentine and some beeswax. Cleaning tests, performed with different organic solvents, suggest the use of isopropyl alcohol as cleaning agent because it is less efficient in comparison to others solvents; thus it ensures a careful and controlled removal of the varnishes.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call