Abstract

A series of nitrogen-doped porous graphene foams (NPGFs) have been prepared by hydrothermally treating a mixed solution of graphite oxide (GO) and ammonia. The NPGFs are used as the counter electrode (CE) material for dye-sensitized solar cells (DSCs) in conjunction with the conventional iodide-based electrolyte and the recently developed sulfide-based electrolyte. Tafel-polarization tests and electrochemical impedance spectroscopic (EIS) measurements confirmed that the NPGFs work efficiently in both electrolyte systems, and under air mass (AM) 1.5G 100 mW cm(-2) light illumination, optimal efficiencies of 4.5% and 2.1% were obtained for the iodide-based electrolyte and sulfide-based electrolyte, respectively. To the best of our knowledge, this is the first study on N-doped graphene CEs in conjunction with sulfide-based electrolytes and therefore, the current results are deemed to provide new insights into developing novel low-cost and metal-free CEs for DSCs.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.