Dual-wideband radiating surface using interleaved electric and magnetic currents: Underlying physics and experimental verification

Abstract

Unlike popular multiband antenna array radiation based on either electric or magnetic surface currents, the use of mutually interleaved and tightly coupled electric and magnetic currents results in an aperture-reuse space-efficient multiband radiating surface for highly integrated antenna-frontend architecture and spatial power combining design scenarios. In this work, slot and dipole modes corresponding to magnetic and electric currents are effectively interleaved and excited in a surface to develop a space-efficient dual-wideband aperture-shared radiating surface. In this case, due to an effective reuse of the antenna aperture over both frequency bands, a high aperture-reuse efficiency is achieved. First, we devise a planar magneto-electric (ME)-dipole-alike antenna and analyze it in both the frequency and time domain. The antenna is then studied by the characteristic mode theory and the findings are validated using full-wave simulations. The developed planar ME-dipole-alike antenna is used to realize a dual-wideband radiating surface in which electric and magnetic currents are mutually coupled and interlaced, which is excited by properly oriented and distributed sources on the antenna's surface. Eventually, a highly isolated dual-wideband prototype was developed and fabricated using a cost-effective multi-layer Printed Circuit Board (PCB) process that operates in the Ku-band with both impedance and gain bandwidth of approximately 42% and in the Ka-band with respective impedance and gain bandwidth of 29% and 16.32%.