Abstract

AbstractSilicon quantum dot (Si QD)‐based light emitting devices are fabricated on Si nanowire (Si NW) arrays. Through inserting Al2O3‐Ag hybrid nanostructures (Al2O3‐Ag HNs) between Si NWs and Si QDs, both photoluminescence (PL) and electroluminescence (EL) are remarkably enhanced compared to the control sample. The PL enhancement can be mainly attributed to passivation effect of Al2O3 to p‐type Si NWs and enlarged absorption cross‐section due to the local surface plasmon resonance effect of Ag nanoparticles. The EL intensity is enhanced by 14.9‐fold at the same injection current under a lower applied voltage, which may result from the high injection efficiency of electrons and the promoted waveguide effect of nanowire structures with Al2O3‐Ag HNs. It is demonstrated that light emitting device performances can be well improved by careful management of both electrons and photons via controlling the interface conditions of Si NWs/Si QDs.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call