Dual-energy computed tomography of canine uroliths.

Abstract

OBJECTIVE To determine whether dual-energy CT (DECT) could accurately differentiate the composition of common canine uroliths in a phantom model. SAMPLE 30 canine uroliths with pure compositions. PROCEDURES Each urolith was composed of ≥ 70% struvite (n = 10), urate (8), cystine (5), calcium oxalate (4), or brushite (3) as determined by standard laboratory methods performed at the Canadian Veterinary Urolith Centre. Uroliths were suspended in an agar phantom, and DECT was performed at low (80 kV) and high (140 kV) energies. The ability of low- and high-energy CT numbers, DECT number, and DECT ratio to distinguish uroliths on the basis of composition was assessed with multivariate ANOVA. RESULTS No single DECT measure differentiated all urolith types. The DECT ratio differentiated urate uroliths from all other types of uroliths. The DECT and low-energy CT numbers were able to differentiate between 8 and 7 pairs of urolith types, respectively. CONCLUSIONS AND CLINICAL RELEVANCE Results indicated that DECT was unable to differentiate common types of canine uroliths in an in vitro model; therefore, it is unlikely to be clinically useful for determining urolith composition in vivo. Given that the primary reasons for determining urolith composition in vivo are to predict response to shock wave lithotripsy and develop a treatment plan, future research should focus on the correlation between DECT measurements and urolith fragility rather than urolith composition.