Dual-effects of carbon doping on the recrystallization kinetics of the Cantor alloy during mid-temperature annealing

Abstract

In this study, the comprehensive effects of carbon doping on the recrystallization process and the corresponding mechanical performance of the Cantor alloy during mid-temperature (700 °C) annealing were investigated. In the early stage of recrystallization, i.e., before 7 min annealing, abundant M23C6 carbides form preferentially along deformation bands and hence accelerate recrystallization process by providing dense heterogeneous nucleation sites. The fast consuming of the stored defects by recrystallization in this stage leads to the drastic decrease of strength but the regain of ductility. Detailed characterization on the precipitation behavior further shows that the initial fine carbide (≤10 nm in size) firstly enriches in carbon only, and then gradually grows to perfect M23C6 as controlled by the diffusion of Cr. In the later stage of recrystallization, e.g., after 7 min annealing, these carbides coarsen and Zener-pin grain boundaries from further migration, which in turn suppress the overall recrystallization process. In this stage the mechanical properties vary slightly as a result of the balance between the slowly deceased amount of hard non-recrystallized regions and the slowly increased carbide volume fraction.