Dual band notched UWB-BPF based on hybrid microstrip-to-CPW transition

Abstract

The research paper proposes a compact dual notched band ultra-wideband (UWB) bandpass filter (BPF). The basic architecture of the filter is developed using the hybrid microstrip-to-coplanar waveguide (CPW) technology, wherein a short circuited CPW in ground is coupled vertically via the dielectric to the microstrip lines on the top plane. The broadside alignment generates a three pole BPF with dual transmission zeros (TZs) on either passband/stopband edges which leads to minimum insertion loss passband and sharp roll-offs. Later, multiple spirals and split ring resonators (SRRs) are embedded in the CPW of the UWB filter to introduce the dual notches and widen the stopband respectively. The proposed filter is fabricated to justify its measured response. The proposed filter measures only 14.6 × 7.3 mm2.