Dual axis solar tracking system for a parabolic dish CPU water heater

Abstract

The solar parabolic dish water heater is highly efficient but has limited hours of work only when sunlight is perpendicular to its surface. Therefore, this work aims to continue the work of the solar parabolic dish in the daytime using a dual tracking system, depending on the geographic location of the system (longitude and latitude angles) and using the C # programming language. To verify the effect of the dual-axis solar tracking system, the current study considered two types of solar parabolic dishes, the first was fixed, and the second was a rotating dish (by the dual tracking system). It was observed that the water temperature at the outlet of the tracking type solar water heater is 22% higher than that for the fixed dish type; this means that the proposed system has improved the temperature of water in the heat exchanger. Therefore, the highest water temperature value of about 51.4ffiC was at the outlet of the heat exchanger for the tracking type at 1:00 pm, while the temperature recorded for the fixed type was about 46.1ffiC. The highest energy gained from the solar heating system was at 1:00 pm for both types, which was about 76.9 W from the tracking type and 54.7 W from the fixed type. It was also observed that in the fixed dish type, most energy losses occurred during the daytime, while for the tracer of the dish type, useful energy was gained during most of the sunny working hours depending on the solar radiation intensity.