Abstract

AbstractA kinetic study on simultaneous interpenetrating polymer network formation of epoxy resin based on diglycidyl ether of Bisphenol A (DGEBA) and unsaturated polyester (UP) was performed by means of differential scanning calorimetry (DSC). Isothermal DSC characterizations of neat resins and their mixture (in a weight ratio of 50/50) were performed at different temperatures. Dynamic DSC characterization of the systems were performed at three different heating rates. A lower total heat of reaction developed during simultaneous polymerization in dynamic DSC tests was found, compared to the total heats developed during pure resins network formation. This phenomenon can be interpreted as an effect of network interlock that could not be compensated for completely by an increase in curing temperature. The kinetics of the reactions was described by empirical models. The DGEBA, in a 50/50 UP/DGEBA blend, indicated a higher rate constant than the pure DGEBA. The obtained results suggests that the hydroxyl end group of UP in the blend provided a favorably catalytic environment for the DGEBA cure. The results are in good agreement with the literature data. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2689–2698, 2002

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call