Drying of Inorganic Particulate Compounds

Abstract

ABSTRACT Inorganic particulates are usually dried in a fixed bed, fluidized bed, or spray dryers. These compounds are easy to dry, once their physical structure, with high porosity, allows moisture content removal with low resistances. For fluidized bed of alumina particle evaluations, a laboratory-scale drying unit was built. The drying experiments were carried out with alumina particles with different diameters to evaluate temperature and air flow rate effects on drying kinetics and bed height. In another case, the dehydration of a mixture of rare-earth chlorides in a fluidized bed was studied, aiming at the production of anhydrous rare-earth chlorides, used to obtain mischmetal by electrolytic and metallothermic processes. The spray drying experiments were carried out in a pilot plant. Spray drying is a technique largely applied in industrial processes to dry solutions or suspensions, converting their solid parts into a dried powder. A set of rare-earth drying experiments was carried out, aiming at the development of techniques to obtain a powder that could satisfy international morphological requirements. The results allowed evaluating the effects of air flow rate, feed concentration, atomizer model, rotation velocity, and atomization pressure on powder density and particle size distribution.