Abstract
The effects of gas velocity, inlet gas temperature and the solid feed rate on the drying efficiency, the outlet solid moisture content, bed temperature in each stage, the outlet gas humidity and temperature in a rectangular acryl multistage fluidized bed (0.172 m×0.192 m×1.5 m-high) with a downcomer (0.04 m-I.D.) were investigated. The experiments were performed by using 1.9 mm millet particles. The final moisture contents of the solids increased with increasing the solid feed rate. The drying efficiency increased with increasing the wetted solid feed rate but decreased with increasing the inlet gas temperature. The drying performance of the multistage fluidized bed was compared with the single-stage fluidized bed and found to be superior under identical operation conditions. The model predicted values were well matched with the experimental data in the multistage fluidized bed dryer.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.