Abstract
Drying kinetics of Malaysian paddy dried in a laboratory scale batch rapid bin dryer was studied. Quality of paddy after drying at temperatures of 60 and 80°C, bed heights of 2 and 4 cm, and at different drying stages was presented in terms of cracking percentage. Moisture content of paddy reduced exponentially with time and became stable at equilibrium moisture content. Characteristic drying rate curves exhibited mainly falling rate period, with an induction period in deep beds, but without the constant rate period. A custom-made light box was built to visually analyze the cracking in paddy kernel. The extent of breakage is directly related to the crack percentage. The percentage of cracks increased with drying and tempering temperatures and was higher after 2 weeks of storage before milling. Bed heights did not significantly affect the head rice yield as much as tempering between two drying stages. Temperatures above 80°C caused severe cracking in paddy kernel and produced miserable yield of head rice after milling, which could be slightly improved by tempering. The use of a proper miller is also important in ensuring good head yield results and whiteness quality.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.