Dry Powder Inhalers Based on Chitosan-Mannitol Binary Carriers: Effect of the Powder Properties on the Aerosolization Performance.

Abstract

Carriers play an important role in improving the aerosolization performance of dry powder inhalers (DPIs). Despite that intensive attention had been paid to the establishment of the advanced carriers with controllable physicochemical properties in recent years, the design and optimization of carrier-based DPIs remain an empiricism-based process. DPIs are a powder system of complex multiphase, and thus their physicochemical properties cannot fully explain the powder behavior. A comprehensive exposition of powder properties is demanded to build a bridge between the physicochemical properties of carriers and the aerosolization performance of DPIs. In this study, an FT-4 powder rheometer was employed to explore the powder properties, including dynamic flow energy, aeration, and permeability of the chitosan-mannitol binary carriers (CMBCs). CMBCs were self-designed as an advanced carrier with controllable surface roughness to obtain enhanced aerosolization performance. The specific mechanism of CMBCs to enhance the aerosolization performance of DPIs was elaborated based on the theory of pulmonary delivery processes by introducing powder properties. The results exhibited that CMBCs with appropriate surface roughness had lower special energy, lower aeration energy, and higher permeability. It could be predicted that CMBC-based DPIs had greater tendency to fluidize and disperse in airflow, and the lower adhesion force between particles enabled drugs to be detached from the carrier to achieve higher fine particle fractions. The specific mechanism on how physicochemical properties influenced the aerosolization performance during the pulmonary delivery processes could be figured out with the introduction of powder properties.