Abstract
Most of companies know that there are strategies to become green industry, and they realize that green efforts have impacts on product quality and cost. Axiomatic Green Methodology models the relationship between green, quality, and cost. This methodology starts with determining the green improvement objective and then continues with mapping the functional, economic, and green requirements. From the mapping, variables which affect the requirements are identified. Afterwards, the effect of each variable is determined by performing experiments and regression modelling. In this research, axiomatic green methodology was implemented to dry machining of milling machine in order to reduce the amount of coolant. Dry machining will be feasible if it is not worse than the minimum required quality. As a result, dry machining is feasible without producing any defect. The proposed machining parameter is to reduce the coolant flow rate from 6.882 ml/minute to 0 ml/minute, set the depth of cut at 1.2 mm, spindle rotation speed at 500 rpm, and feed rate at 128 mm/minute. This solution is also resulted in reduction of cost for 200.48 rupiahs for each process.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: IOP Conference Series: Materials Science and Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.