Dry fabrication process for heterojunction solar cells through in-situ plasma cleaning and passivation

Abstract

We have studied low temperature plasma processes ( T sub≤200 °C) for the efficient cleaning and passivation of c-Si wafers, aiming for fully dry fabrication of heterojunction solar cells. We have experimented with H 2–SiF 4 plasmas in a standard RF PECVD reactor in order to etch the native oxide from the c-Si wafer and a thin a-Si:H layer was deposited from SiH 4 to passivate the c-Si surface. In-situ ellipsometry was used to optimize the process conditions for an efficient surface cleaning. Various plasma treatments were performed before a-Si:H deposition in order to reduce the surface recombination. Optimized process conditions resulted in high effective lifetime values ( τ eff≈1.55 ms), low effective surface recombination velocities ( S eff≤9 cm s −1) and high implicit open circuit voltages ( V oc≈0.713 V).