Abstract
Dry dense-medium fluidized bed separation provides a new alternative approach for coal beneficiation and cleaning. An indicator of segregation degree Sash was proposed to evaluate the stratified performance of coal samples by bed density. Fluidization stability of the bed was greatly enhanced by mixing a certain amount (21.53%) of fine magnetite powder (< 0.15 mm) into the fluidized media, which indicated a uniform density distribution as well as slight fluctuations in bed. It was found that the favorable density-segregation performance of 3-13 mm coarse coal occurred with a static bed height of 80 mm and a superficial gas velocity of 11.84 cm/s. The optimal segregation degree values of 0.67, 0.74 and 0.76 were obtained for 3-6, 6-10 and 10-13 mm coal samples, respectively. Low-ash clean coal with yields of 50.79, 56.83 and 61.24% were effectively acquired by the dry separation for various coal size fractions, respectively. Probable error values of 0.07, 0.055 and 0.05 g/cm 3 were achieved, indicating
Paper version not known (
Free)
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
