Drop properties and pressure fluctuations in liquid–liquid–solid fluidized-bed reactors

Abstract

Characteristics of size, rising velocity and distribution of liquid drops were investigated in an immiscible liquid–liquid–solid fluidized-bed reactor whose diameter was 0.102 and 2.5 m in height. In addition, pressure fluctuations were measured and analyzed by adopting the theory of chaos, to discuss the relation between the properties of liquid drops and the resultant flow behavior of three (liquid–liquid–solid) phase in the reactor. Effects of velocities of dispersed (0–0.04 m s −1) and continuous (0.02–0.14 m s −1) liquid phases and fluidized particle size (1, 2.1, 3 or 6 mm) on the liquid drop properties and pressure fluctuations in the reactor were determined. The resultant flow behavior of liquid drops became more irregular and complicated with increasing the velocity of dispersed or continuous liquid phase, but less complicated with increasing fluidized particle size, in the beds of 1.0 or 2.1 mm glass beads. In the beds of 3.0 or 6.0 mm glass beads, the effects of continuous phase velocity was marginal. The resultant flow behavior of liquid drops was dependent strongly upon the drop size and its distribution. The drop size increased with increasing dispersed phase velocity, but decreased with increasing particle size. The drop size tended to increase with approaching to the center or increasing the height from the distributor. The size and rising velocity of liquid drops and correlation dimension of pressure fluctuations have been well correlated in terms of operating variables.