Drilling Process Monitoring for Predicting Mechanical Properties of Jointed Rock Mass: A Review

Abstract

Reliably assessing the quality and mechanical properties of rock masses is crucial in underground engineering. However, existing methods have significant limitations in terms of applicability and accuracy. Therefore, a field measurement method that meets the real-time monitoring and safety requirements for the quality of engineering rock masses is needed. Firstly, the research findings of domestic and international scholars on the application of drilling process monitoring technology are comprehensively analyzed. Rotary cutting penetration tests are conducted on tuff rock masses containing fractures and joints. Various rock mass classification and evaluation standards are integrated with rotary penetration tests. Rotary cutting penetration tests are used to determine the residual strength of rock, based on this review. The rationality of the calculated mi parameter values is validated. The peak strength, residual strength, and errors of the rock are obtained based on the penetration method. The rock quality index rock quality designation from drilling (RQDd) is redefined, based on the drilling process monitoring apparatus (DPMA). Rock mass classification is conducted, based on the correlation between the standard deviation of rotary drilling energy and the rock quality designation (RQD). Additionally, a new relational formula is introduced to determine the RQD from variations in drilling energy, based on discontinuity frequency. This field measurement method undoubtedly provides a crucial scientific basis for rock design and construction, ensuring long-term safety in engineering applications.