Abstract
In recent years, particle reinforced metal matrix composites (PRMMCs)has been widely applied because of its excellent mechanical performances. But the machining is very difficult due to the rigidity of reinforced phase in it, thus the popularization of PRMMCs is restricted much. Here, a method of ultrasonic vibration drilling is presented to the hole-making of Aluminum-matrix composites based on cutting force analysis between common and vibration machining. In virtue of the self-developed ultrasonic drilling equipment, experiments of common and ultrasonic vibration drilling are performed on SiC particle reinforced Aluminum-matrix composites with different content of SiC by using two types of tungsten carbide twist drill. Since the tool life can be represented directly by drilling force, especially the torque, the study of drilling force is very important for the surface roughness, the design and life of drill. Drilling force and its variation in the machining process are analyzed by comparison of common and vibration drilling. It shows that the eviction of drilling chips can be meliorated to some extent, and the drilling torque can be reduced about 30% during the ultrasonic vibration drilling process.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.