Abstract
A unique reinforced concrete column design method which aims to improve the ductile behavior of reinforced concrete columns by utilizing various steel grades for longitudinal reinforcements is evaluated in this article. Six large-scale reinforced concrete columns were tested, with the columns subjected to axial load and cyclic forces under reversed bending. The parameters varied in the test program including the axial loading level and the ratio and strength of longitudinal steel reinforcement. It was found from the test results that utilizing longitudinal high-strength steel reinforcement by the ratio of 30%, 50%, and 100% of the total longitudinal reinforcement in a column section will increase the lateral loading drift capacity by 18%, 26%, and 55% on average, respectively. Parametric studies via nonlinear finite-element approach were performed to study the influence of various design parameters on the ultimate drift capacity of reinforced concrete columns. The correlation between the ultimate drift capacity and the confinement level, the axial loading level, and the ratio and grade of longitudinal high-strength reinforcing bars was investigated. Design charts for various ultimate drift levels in terms of other design parameters were developed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
