Abstract
Polymer microchannel heat exchangers for use in cryocooler applications have been developed. These heat exchangers are manufactured using a thermal drawing process where a bulk polymer preform is heated and stretched. The process results in channels with a characteristic dimension of 50-100 µm and with an overall length of many meters. The drawn heat exchangers are lightweight, flexible, and have a large surface-area-to-volume ratio. Initial tests on a Joule-Thomson cryocooler with a heat exchanger of overall dimension of 2.5mm x 2.5mm x 420mm with nitrogen as a working fluid were performed. Nitrogen was successfully liquified with a mass flow rate of 34 mg/s and cooling power of 200 mW at 80 K.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IOP Conference Series: Materials Science and Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
