Abstract

Solar-blind ultraviolet photodetectors with metal-semiconductor-metal structure were fabricated based on β-(Al0.25Ga0.75)x2O3/β-Ga2O3 film grown by metal-organic chemical vapor deposition. It was known that various surface states increase dark current and a large number of defects can hinder the transport of carriers, resulting in low switching ratio and low responsivity of the device. In this work, β-(Al0.25Ga0.75)2O3 films are used as surface passivation materials. Owning to its wide band gap, we obtain excellent light transmission and high lattice matching with β-Ga2O3. We explore the change and mechanism of the detection performance of the β-Ga2O3 detector after β-(Al0.25Ga0.75)2O3 surface passivation. It is found that under the illumination with 254 nm light at bias 5 V, the β-(Al0.25Ga0.75)2O3/β-Ga2O3 photodetectors show dark current of just 18 pA and high current on/off ratio of 2.16 × 105. The dark current is sharply reduced about 50 times after passivation of the β-Ga2O3 surface, and current on/off ratio increases by approximately 2 times. It is obvious that β-Ga2O3 detectors with β-(Al0.25Ga0.75)2O3 surface passivation can offer superior detector performance.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call