Drag Reduction Technology of Water Flow on Microstructured Surfaces: A Novel Perspective from Vortex Distributions and Densities.

Abstract

Revealing the turbulent drag reduction mechanism of water flow on microstructured surfaces is beneficial to controlling and using this technology to reduce turbulence losses and save energy during water transportation. Two microstructured samples, including a superhydrophobic and a riblet surface, were fabricated near which the water flow velocity, and the Reynolds shear stress and vortex distribution were investigated using a particle image velocimetry. The dimensionless velocity was introduced to simplify the Ω vortex method. The definition of vortex density in water flow was proposed to quantify the distribution of different strength vortices. Results showed that the velocity of the superhydrophobic surface (SHS) was higher compared with the riblet surface (RS), while the Reynolds shear stress was small. The vortices on microstructured surfaces were weakened within 0.2 times that of water depth when identified by the improved ΩM method. Meanwhile, the vortex density of weak vortices on microstructured surfaces increased, while the vortex density of strong vortices decreased, proving that the reduction mechanism of turbulence resistance on microstructured surfaces was to suppress the development of vortices. When the Reynolds number ranged from 85,900 to 137,440, the drag reduction impact of the superhydrophobic surface was the best, and the drag reduction rate was 9.48%. The reduction mechanism of turbulence resistance on microstructured surfaces was revealed from a novel perspective of vortex distributions and densities. Research on the structure of water flow near the microstructured surface can promote the drag reduction application in the water field.