Abstract
This study examines aerodynamic performance enhancement of Vertical Axis Wind Turbine (VAWT) blades with Gurney flap (GF) modified by slits. A quasi-3D computational fluid dynamics solution based on Reynolds-averaged Navier-Stokes model is employed to evaluate the effectiveness of slit GF blades, in particular the lift-to-drag ratio. The computational domain includes three pairs of GFs and slits combination along the blade span-wise direction to allow quasi-3D flow development while applying translational periodic boundary condition on the two end-wall boundaries. The inlet velocity is 9 m/s for a VAWT configuration with Tip Speed Ratios (TSRs) of 1.44, 2.64, and 3.3, respectively and each of these TSRs represents low, medium, and high regimes of TSRs. Simulation results have shown a significant 8% drag reduction for blades with slit GFs at medium range of TSRs, albeit with a 2% decrease in lift compared to blades with clean GFs. This improves the lift-to-drag ratio and enhances moment production. The power generation also shows increases of 1.5%, 6.5%, and 11.3% at low, medium, and high TSR regimes, respectively, for the analysed slit GF blades. The drag reduction is primarily attributed to the generation of small-scale vortices by the slit, dissipating large coherent flow structures more rapidly in the near wake-field.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of Wind Engineering & Industrial Aerodynamics
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
