Abstract
One of the best ways to obtain TiN coatings is through the nitriding process by efficient methods such as dense plasma focus (DPF). The gas composition of the nitrogen environment is a crucial factor affecting the properties of the coating. In this study, three different atmospheres of 100%N2, 50%N2–50%O2, and 75%N2–25%Ar were used to investigate their impact on the mechanical and biological properties of TiN coatings on NiTi substrate. The operating condition that yielded the coating with the highest hardness, as well as the lowest contact angle and Ni ion release, was chosen as the optimum condition. According to the XRD results, TiN was recognized as the dominant phase which causes high hardness and prevents Ni ion release. Moreover, surface analyses determined that the sample coated in 50%N2 composition possessed higher hardness and as a result displayed better mechanical properties. Also, the improved microstructural properties lead to an enhanced coating/substrate adhesion strength. On the other hand, the reaction of TiO2 and TiN lead to the formation of TiN0.6O0.4 ternary compound and for this reason, the 50%N2–50%O2 sample exhibited better performance in preventing the release of the toxic nickel ion compared to the other samples. Finally, due to the presence of TiO2 and TiN0.6O0.4 in the sample surface treated at 50%N2–50%O2, better hydrophilicity was observed compared to other samples. Results confirm that the applied surface modification method is effective in increasing the mechanical and biological properties of the NiTi, where it may open numerous possibilities for efficient use in orthopedic applications.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have