Abstract
No-flow underfill has been invented and practiced in the industry for a few years. However, due to the interfering of silica fillers with solder joint formation, most no-flow underfills are not filled with silica fillers and hence have a high coefficient of thermal expansion (CTE), which is undesirable for high reliability. In a novel invention, a double-layer no-flow underfill is implemented to the flip-chip process and allows fillers to be incorporated into the no-flow underfill. The effects of bottom layer underfill thickness, bottom layer underfill viscosity, and reflow profile on the solder wetting properties are investigated in a design of experiment (DOE) using quartz chips. It is found that the thickness and viscosity of the bottom layer underfill are essential to the wetting of the solder bumps. CSP components are assembled using the double-layer no-flow underfill process. Silica fillers of different sizes and weight percentages are incorporated into the upper layer underfill. With high viscosity bottom layer underfill, up to 40 wt% fillers can be added into the upper layer underfill and do not interfere with solder joint formation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
