Double-Drum Test Bench for Variable Load Transfer Simulation by Electromechanical Inertia Compensation.

Abstract

To improve the accuracy and actual road equivalence of vehicle performance testing using test benches, a double-drum test bench that meets the test requirements of vehicle control system prototypes and in-use vehicles was designed. Dynamic models of the single-wheel test bench and the vehicle test bench were established, and mechanisms were theoretically analyzed for single-wheel variable adhesion and vehicle load transfer for equivalent testing using the variable placement angle. The mechanism of electromechanical inertia compensation was studied to realize stepless simulation of vehicle inertia and simulate dynamic load while braking. The simulation model of the vehicle test bench system was established based on MATLAB/Simulink. Simulations were carried out to verify the anti-lock braking system (ABS) performance test functionality of the test bench under high adhesion, bisectional, and low adhesion conditions. Referring to the simulation conditions, ABS tests under actual test bench and road conditions were carried out. Results demonstrated that the mechanism of variable load transfer simulation by electromechanical inertia compensation improves the equivalent accuracy compared to that of its road test equivalent, verifying the feasibility of the simulation mechanism. This study could help further improve the accuracy and reduce the cost of vehicle performance testing, thus greatly benefitting the vehicle development and testing industry.