Double yielding in PA6/TPV‐MAH blends: Effect of crosslinking degree of the dispersed phase

Abstract

AbstractThermoplastic vulcanizates (TPVs) based on PP and EPDM (the ratio is 5:5) with different crosslinking degrees were prepared using different contents of phenolic resins, and then blended with polyamide 6 (PA6). The results indicated that with an increase in crosslinking degree, the double yielding phenomenon in PA6/TPV blends became more distinct, the yield stress of the first yield point and the yield stress difference of the two yield points decreased; however, the yield strain of the first yield point did not change with the increasing crosslinking degree of the TPV, but the yield strain of the second yield point increased, resulting in a more broadened yield region. The SEM results showed that with an increase in the crosslinking degree of TPV, the diameter of TPV increased in the core layer, and the orientation degree of TPV in the skin and subskin layer deceased, accompanying with a decrease of the ratio of length to diameter (L/D) of the droplets. The morphology evolution of the PA6/TPV blend during the tensile test was also studied, and the results agreed well with the model we proposed. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 912–922, 2009