Double networks hybrid hydrogels of silica nanoparticles/polyacrylamide: Network stiffness, viscoelastic, mechanical and adhesion properties

Abstract

Today, the challenge of enhancing the strength and adhesion of the polyacrylamide hydrogel network is still a major concern in many applications. This study investigates the effect of silica nanoparticle concentration on the cross-linked polyacrylamide hydrogel’s gelation, viscoelastic, structural, and adhesion properties. The hybrid hydrogels were evaluated using DSC, XRD, SEM, and rheological analysis to determine their enthalpy of cross-linking, crystallinity, morphology, and elastic properties. The results of kinetic analysis confirmed the catalytic effect of silica nanoparticles on the gelation kinetics. A deviation from the elastic behavior of the unfilled hydrogel was found from the rheological studies. Using the Weibull Model to describe the creep test results showed a significant increase in retardation time with increasing silica nanoparticles content up to the percolation threshold of 0.24 wt.%. This confirmed the development of a more viscous behavior due to the formation of a physical network of nano-silica particles. Based on the DSC energy of hydrogels, both chemical and physical tie points (approximately 19 covalent crosslinking points) were calculated. The hydrogel containing 9 wt.% of silica nanoparticles demonstrated significant improvement in density, and adhesion to the metal surface by about 100% and 350%, respectively. As a result of this study, the hydrogel containing 9 wt% of silica nanoparticles (H9) is suggested for various field studies, such as oil well plugging industries.