Double fiber probe with a single fiber Bragg grating based on the capillary-driven self-assembly fabrication method for dimensional measurement of micro parts

Abstract

Focusing on the ultra-precision dimensional measurement of parts with micro-scale dimensions and high aspect ratios, a two-dimensional double fiber probe with a single fiber Bragg grating (DS-FBG probe) is investigated in detail in this paper. The theoretical analysis of the sensing principle is verified by spectrum simulations of the DS-FBG probe with a modified transfer matrix method using the strain distribution within the DS-FBG probe. The fabrication process and physical principle of the capillary-driven self-assembly of double fibers in the UV adhesive with a low viscosity are demonstrated. Experimental results indicate that resolutions of 30 nm in radial direction and 15 nm in axial direction can be achieved, and the short-term displacement drifts within 90 seconds are 28.0 nm in radial direction and 7.9 nm in axial direction, and the long-term displacement drifts within 1 hour are 61.3 nm in radial direction and 17.3 nm in axial direction. The repeatability of the probing system can reach 60 nm and the measurement result of a standard nozzle is 300.49 μm with a standard deviation of 20 nm.