Abstract
Compared to autoclave-cured prepreg, liquid composite moulding (LCM) is a cost-effective alternative to produce advanced composites, thanks to the less-expensive intermediate materials, lower capital investment and shorter cycle time. A separate preforming step is typically required within the process chain to convert 2D fabric blanks into complex 3D geometries before moulding. Numerical models are therefore important to ensure near net-shape preforms during the design phase, in order to minimise the material wastage related to preforming. In this study, a microscale finite element (FE) model was employed to assist in determining the ply shape of multi-ply biaxial non-crimp fabrics (NCF) to achieve net-shape preforms made by double diaphragm forming (DDF) using a spar-like geometry. The forming deformation of the NCF was predicted by simulations considering the in-plane stiffness of the NCF. The location of wrinkles was indicated by the simulation using membrane elements. By continuously removing the redundant fabric material making contact with the machine bed and tool surface, net-shape preforms were achieved for the target geometry using single and multiple NCF plies respectively. Compared with the original ply shape, the number of wrinkles was reduced for the net-shape case due to the reduction in the bridging force induced by the contact pairing between fabric-diaphragm assembly and the machine bed.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
