Abstract
This study presents a novel and facile strategy for fabricating fire-resistant, ultraviolet (UV)-shielding, and tensile-enhanced polylactide (PLA) composites using two-dimensional (2D) MXene (Ti3C2) flakes chemically modified with 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO). The thermal and burning performances of PLA composites were demonstrated by the limiting oxygen index, UL-94 test, and cone calorimetry. The UV-shielding and tensile performances were also examined. The results revealed that PLA/Ti3C2-DOPO (3 wt %) displayed a V-0 rating in the UL-94 test. The enhancement against fire hazard was reflected by the significant reduction in the peak heat release rate (33.7%), total heat release (47%), peak CO production (58.8%), and total smoke production (41.7%). The improved fire-safety performance of the composites is attributed to the interplay of catalytic, barrier, and condensed effects of the Ti3C2-DOPO nanosheets in the PLA matrix. PLA/Ti3C2-DOPO also showed an increase (∼9%) in tensile strength and an "Excellent" level (UPF 50+) in the UV-protection assessment. In all, this study introduces a novel chemical modification strategy for 2D MXene flakes to fabricate multifunctional PLA composites, which are promising candidates for next-generation sustainable and protective plastic products.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
