Door to diuretics time is longer among heart failure patients with atrial fibrillation

Abstract

Hole-cleaning optimization is one of the major challenges while drilling long-reach horizontal wells. Accumulation of cuttings can affect the equivalent circulating density (ECD) by decreasing the open flow area and increasing the average density of the drilling fluid. The transient development or removal of cuttings bed due to variation of operating parameters are often ignored in the majority of prior numerical studies. In this paper, it is aimed to develop a transient cutting transport model to predict ECD while drilling. A one-dimensional transient two-phase hydraulic model based on the drift-flux approach is developed to predict the cuttings transport considering cuttings deposition and entrainment. The numerical method employs an upwind scheme to discretize the governing equations. To account for the effect of operating parameters on the cuttings bed, two empirical correlations were employed from the literature. A new empirical correlation is also developed for the prediction of cuttings bed hold-up through regression analysis of the experimental results of a published study. A computer program is developed to solve the governing equations and predict the ECD taking into account the effect of suspended cuttings and cuttings bed along the wellbore trajectory. The numerical model is validated by comparing the predicted return weight of cuttings with measured data in the literature for the cases of no pipe rotation and pipe rotation. The effects of employed empirical correlations on predicted ECD profiles are also examined for a hypothetical well. It is realized that the predicted cuttings bed area of the proposed correlation falls between the predictions of the existing empirical correlations. It is concluded that the most conservative prediction in terms of cutting accumulation in the wellbore cannot necessarily yield a conservative prediction in terms of ECD for early times.