Abstract
Apart from traditional methods of steel ladle treatment, degassing in the process of continuous casting (in-line degassing) is a perspective one. In the world a line of process flowsheets have been elaborated, but in practice the only one process has been implemented, which was developed by Professor G.A. Sokolov based on theoretical elaborations. The experience of its application in the BOF shop No. 2 of NLMK confirmed the efficiency of degassing in the process of continuous casting and expediency of further work on perfection of the technology and facilities structure for in-line degassing. Accounting the experience gained at AKHK “VNIIMETMASH”, a modified variant of in-line degassing facility was elaborated based on technological specifications of CNIIchermet. It was noted, that thanks to additional bunker-accumulator, fixed at the vacuum chamber, a possibility appeared to change steel ladles without disruption of continuous casting series. It enables to increase the share of degassed steel. At the designing of BOF shop of “Zaporozhstal” steel-works, planned for construction, specialists of AKHK “VNIIMETMASH”, CNIIchermet and YUMZ elaborated a design of two-position facility of increased efficiency for steel in-line degassing. Detailed description of the facility design presented as well as description of its basic units, elaborated at the level in invention. Taking into account that the facility height with the accumulator will make it difficult to place it in the existing shops, a modified in-line degassed elaborated without accumulator, which makes it possible continuous degassing of several heats. Such a degasser can be applied at both continuous casting of steel and casting of large ingots from several heats. The backlog, created by domestic scientists and specialists enables to solve technical problems, arising at elaboration and running of modern facilities of in-line degassing.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have