Does running speed affect the response of joint level mechanics in non-rearfoot strike runners to footwear of varying longitudinal bending stiffness?

Abstract

BackgroundModifying the longitudinal bending stiffness (LBS) of footwear has become a popular method to improve sport performance. It has been demonstrated to influence running economy by altering lower extremity joint level mechanics. Previous studies have only examined within-participant effects at one running speed. Research questionDo joint level mechanics differ in response to varying footwear LBS at a range of running speeds? MethodsThis study utilized a cross-sectional repeated measure study design using a convenience sample. Ten well trained non-rearfoot strike male distance runners ran at 3.89, 4.70, and 5.56 m/s (14, 17, 20 km/hr) in footwear of three different LBS levels. Mechanics and energetics of the metatarsophalangeal joint (MTPJ), ankle, knee, and hip joints during stance phase were assessed using an 8-camera optical motion capture system (fs = 200 Hz), a force instrumented treadmill (fs = 1000 Hz) and standard inverse dynamics theory. ResultsRange of motion and negative work decreased and angular stiffness increased for the MTPJ with increasing LBS at all speeds (p < .001). Peak MTPJ moment did not change at any speed in response to increased LBS. Negative work at the ankle decreased in the stiff shoe at 17 km/hr (p = .036). Peak ankle plantar flexion velocity decreased with increasing LBS at all speeds (p < .05). SignificanceWhile changes in MTPJ mechanics were consistent across speeds, decreased negative ankle work was only observed at 17 km/hr in the stiff shoe, suggesting that perhaps tuned footwear LBS may need to focus primarily on metabolically beneficial changes in ankle plantar flexor mechanical behavior to improve performance in distance runners. Tuning footwear stiffness may also be beneficial to clinical populations, as clinicians seek to optimize their patients’ locomotion economy.