Abstract
D{sub 2} gas injected into ELMing H-mode discharges in DIII-D reduced total integrated heat flux to the divertor by {approximately}2{times} and peak heat flux by {approximately}5{times}, with only modest degradation to plasma stored energy. Steady gas injection without particle pumping results in eventual degradation in stored energy. The initial reduction in peak heat flux at the divertor tiles may be primarily due to the increase in radiated power from the X-point/divertor region. The eventual formation of a high density region near the X-point appears to play a role in momentum (and energy) transfer from the flux surfaces near the outboard strike point to flux surfaces farther out into the scrapeoff. This may also contribute to further reduction in peak heat flux.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have