Distribution of carbon black in natural rubber/acrylic rubber blends

Abstract

AbstractDistributions of carbon black in 30/70% (w/w) natural rubber (NR)/acrylic rubber (ACM) blends were investigated as a function of the carbon black content and type using a dynamic mechanical thermal analysis (DMTA) technique. Two different types of carbon black (N220 and N330) were used, and 10–50 phr carbon black was compounded to the rubber blends. From the DMTA thermograms of various blends, the weight fractions of carbon black in the NR and ACM phases were calculated. Carbon black was unevenly distributed in the rubber blend. It preferred to migrate into the NR phase, regardless of the amount of carbon black that was used. By increasing the carbon black content, the weight fraction of carbon black in the NR phase decreased whereas that in the ACM phase increased. A change in the type of carbon black from N220 to N330 significantly decreased the weight fraction of carbon black in the NR phase, but it was not sufficiently strong to affect the tensile properties and hardness of the rubber blend. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102:248–256, 2006