Distributed acoustic sensing for seismic surface wave data acquisition in an intertidal environment

Abstract

The application of distributed acoustic sensing (DAS) for shallow marine seismic investigations is assessed, in particular with respect to the collection of seismic surface wave data in an intertidal setting. Appropriate selection and directional sensitivity of fiber-optic cables is considered and the measured data is validated with respect to conventional seismic data acquisition approaches, using geophones and hydrophones, along with independent borehole and seismic cone penetration test (SCPT) data. In terms of cable selection, a reduction in amplitude and frequency response of an armored cable is observed, when compared with an unarmored cable. For seismic surface wave surveys in an offshore environment where the cable would need to withstand significant stresses, the use of the armored variant with limited loss in frequency response may be acceptable from a practical perspective. The DAS approach also has indicated good consistency with conventional means of surface wave data acquisition, and the inverted [Formula: see text] also is very consistent with downhole SCPT data. Observed differences in phase velocity between high tide (Scholte wave propagation) and low tide (Rayleigh wave propagation) are not thought to be related to the particular type of interface wave due to shallow water depth. These differences are more likely to be related to the development of capillary forces in the partially saturated granular medium at low tide. Overall, this study demonstrates that our novel approach of DAS using seabed fiber-optic cables in the intertidal environment is capable of rapidly providing near-surface S-wave velocity data across considerable spatial scales (multikilometer) at high resolution, which is beneficial for the design of subsea cables routes and landfall locations. The associated reduction in deployment and survey duration, when compared with conventional approaches, is particularly important when working in the marine environment due to potentially short weather windows and expensive downtime.