Abstract

Dry granular flows provide an ongoing challenge to physics and under saturation the multiphase physics is even more difficult to disentangle. A rich literature has elucidated the possible regimes achieved, however, the nonlinear nature of the multiphase process makes predicting the appropriate dynamic regime difficult. In this study, we introduce a new experimental strategy to identify the appropriate dynamical regimes by combining traditional methods with acoustic emission measurements. We sheared natural granular materials under dry, water and oil-saturated conditions while recording mechanical, acoustic and visual data. By applying alternate low and high velocity steps we respectively obtained quasi-static and inertial granular flow regimes. Dilation was observed for all high-velocity flows but its amount varied as did the degree of acoustic emission. At high velocities, the water-saturated flow dilated less and had reduced acoustic emissions relative to the dry case. In contrast, the oil-saturated flow dilated more while having even less acoustic emissions. This difference in trends of the dilation and acoustic emissions with increasing fluid viscosity suggests that oil and water granular flows achieved distinct dynamical regimes. Damping of granular pressure by reducing grain collisions and Dilatancy due to fully lubricated contacts are two competing processes influence the saturated shear physics and theoretically expected, but distinguishing between the regimes is difficult to anticipate. The acoustic emissions provide an extra piece of information that allows us to distinguish the physical regimes and determine the competition between processes that control the physics of saturated granular flows in the granular inertial regime.

Highlights

  • Saturated granular flows are ubiquitous in natural processes, and despite their importance, their complex physics is not well understood

  • The central purpose of this study is to suggest a method how to identify rheophysical regimes of granular flows using acoustic emission measurements

  • The results suggest that the granular flow regimes are best established using the combination of theoretical calculations together with experimental, acoustic emission (AE) and dilatancy measurements (Fig. 6)

Read more

Summary

Introduction

Saturated granular flows are ubiquitous in natural processes, and despite their importance, their complex physics is not well understood. Collisions result in a dispersive pressure that reduces the grain packing. Viscous fluids are sheared in the narrow channels between particles can contribute to dilation by creating a lubrication pressure [2, 6, 7]. This pressure pushes apart particles and results in dilation that increases with shear rate and macroscopically is indistinguishable from that produced due to granular pressure. The question we are posing here is whether an experimental method can be developed that accesses the differences in microscopic physics between these two cases

Objectives
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call