Abstract
Dissolved carbon dioxide (dCO2) stripping from a model solution containing sake flavor by feeding gaseous nitrogen (N2) using a microbubble (MB) generator was investigated. The effect of dCO2 stripping by N2MB increased significantly with increasing flow rate of gaseous N2 from 100 to 200mL/min. dCO2 stripping from 3,000mL of the model solution was achieved by feeding N2MB at a flow rate of 200mL/min for 4min. Volatile components from model solution containing sake flavor were hardly reduced even after feeding N2MB at a flow rate of 200mL/min for 15min by cooling to below 10 °C. On the other hand, non-microbubbled gaseous N2 at a flow rate of 200mL/min was not very effective in stripping dCO2. Therefore, the use of N2MB with cooling to below 10 °C was effective in stripping dCO2 while maintaining the volatile components in model solution containing sake flavor.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.