Abstract
In present study, a high-efficiency CaO–SiO2–Al2O3–MgO slag was designed to dissolve alumina particles, and the in situ observation for alumina particles dissolution by CSLM instrument equipped with color fast CCD camera was conducted, which broke through the limitations of the original CSLM equipment. The dynamic measurements showed that the dissolution behavior of alumina particles was controlled by diffusion. Moreover, the mechanism of dissolution of alumina particles was illustrated by combining SEM-EDS detection and thermodynamic calculations. It was found that there was an about 3 μm distinct interface layer when alumina particles were dissolved in slag, and the formation order of products of the interface layer was closely related to its thermodynamics. In addition, the apparent activation energy of reaction between Al2O3 and CaO was used to calculate the reaction time of alumina particles with different particle size, and the viscosity values of the all slags obtained by the Factsage 8.2 thermodynamic software and Stocks-Einstein theory were used to calculate the time required for diffusion of alumina particles with different particle sizes. Compared the total time of chemical reaction and the diffusion mass transfer, it is found that when the radius of alumina particles is greater than 2.5 μm, the dissolutions of alumina particles in all CaO–SiO2–Al2O3–MgO slag composition points are controlled by diffusion.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
