Abstract

AbstractIn this study, the dissolution kinetics of metallic zinc pieces obtained from waste zinc–carbon batteries was investigated using nitric acid solutions. The effects of the concentration of nitric acid, amount of metallic zinc, reaction temperature and stirring speed on the dissolution process were determined, and a mathematical model to represent the dissolution kinetics was presented. It was observed that the dissolution rate increased with increasing nitric acid concentration, stirring speed and reaction temperature and with decreasing amount of metallic zinc. While the concentration of nitric acid, reaction temperature, stirring speed, amount of zinc, and reaction time were 0.15 M, 30°C, 400 rpm, 0.1 g, and 20 min, respectively, the amount of dissolved zinc was found to be 98.3%. The result of the kinetic analysis showed that the dissolution rate fit to the pseudo‐first order kinetic. The activation energy for the dissolution process was calculated to be 12.89 kJ/mol. It was determined that the dissolution process was controlled by diffusion. Zinc ions in the resulting solution after the dissolution treatment was recovered by precipitation method using sodium bicarbonate solution. It was determined that zinc ions were precipitated as zinc hydroxy‐carbonate compound. Zinc compound obtained was subjected to the calcination treatment, and zinc oxide was produced.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.